.png)
國際研討會論文 (International Conference Papers)
1. Yu-Rui Chen, Hung-Yi Wu and Yi-Cheng Huang, “A Wearable Device with Human Speed Feature of Gait Walking and Running Motion,” The 8th International Conference on Positioning Technology, Nov. 28-30, Kuohsiung, Taiwan, 2018.
2. Yen-Cheng Wu and Yi-Cheng Huang, “Detection the Chattering Phenomena of Milling Process Based on Wavelet Transform and Independent Component Analysis Techniques,” International Conference on Advanced Technology Innovation, June 27-June 30, 2017, Krabi, Thailand.
3. Yi-Cheng Huang, Chi-Hsuan Kao and Sheng-Jhe Chen, “Prognostic Diagnosis of the Hollow Ball Screw Preload Classification by Machine Learning,” International conference on Smart Science, Miyazu, Kyoto, Japan March 30–April 2, 2018.
4. Yen-Lin Lee and Yi-Cheng Huang, “Study of the Vibration Suppression Control by Using Input Shaping Technique with Extended Kalman Filter,” International Conference on Precision Machinery and Manufacturing Technology, Auckland, New Zealand, Feb. 4-8, 2018.
5. Yi-Cheng Huang, Shih-Wen Hsu and Ming-Yu Ma, “Improved Anticipatory Iterative Learning Control System for Positioning Accuracy by Particle Swarm Optimization,” International Multi-Conference on Engineering and Technology Innovation, Hualien, Taiwan, Oct. 27-31, 2017.
6. Yi-Cheng Huang and Ching-Hong Cheng, “Ball Nut Preload Diagnosis of the Hollow Ball Screw through Support Vector Machine,” International Conference on Advanced Technology Innovation, June 25-June 28, 2017, Samui, Thailand, 2017.
7. Yi-Cheng Huang and Shih-Wen Hsu, “Particle Swarm Optimization on Designing Anticipatory Iterative Learning Controller for Positioning Accuracy,” 2017 3rd International Conference on Control, Automation and Robotics, pp. 483-486, April 22-24, Nagoya, Japan, 2017. (EI)
8. Huan-Chu Hsu and Yi-Cheng Huang, “Numerical Simulation and Experimental Validation for the Thermal Analysis of a Compact LED Recessed Downlight with Heat Sink Design,” International Multi-Conference on Engineering and Technology Innovation, Taichung, Taiwan, Oct. 28-Nov. 1, 2016.
9. Yi-Cheng Huang and Xiang-Yuan Chen, “Investigation of a Ball Screw Feed Drive System Based on Dynamic Modeling for Motion Control,” International Conference on Advanced Technology Innovation, June 30-July 3, Bali, Indonesia, 2016.
10. Yi-Cheng Huang and Xiang-Yuan Chen, “Precision Motion of an Iterative Learning Control Morphing Input on a Single-Axis Ball Screw Feed Drive System,” 5th International Conference on Virtual Machining Process Technology, May 22-25, Taipei, Taiwan, 2016.
11. Ming-Chi Hsu, Jen-Ai Chao, Ming-Yu Ma and Yi-Cheng Huang, “Hybrid Particle Swarm Optimization Strategy for Designing Iterative Learning Controller for Precise Positioning a Linear Motor,” International Conference on Computing and Precision Engineering, Nov. 27- 30, Sun Moon Lake, Nantou, Taiwan, 2015.
12. Lin-Hua Jheng and Yi-Cheng Huang “Application of Fuzzy Control on the Roll and Pitch Angle of a Hovering Quadcopter,” CACS International Automatic Control Conference, Yilan, Taiwan, Nov. 18-20, 2015 (EI)
13. Yi-Cheng Huang,Yi-Wei Su and Po-Chou Chuo, “Iterative Learning Control Bandwidth Tuning Using the Particle Swarm Optimization Technique for High Precision Motion,” International Multi-Conference on Engineering and Technology Innovation, Kaohsiung, Taiwan, Oct. 30-Nov. 3, 2015.
14. Yi-Cheng Huang, Jen-Ai Chao and Shean-Juinn Chiou, “A Talent Forstering Curriculum of Intelligent Machine Tool Technologies for Mechatronics Engineering Students,” International Education Conference, New York City, USA, Aug. 2-6, 2015.
15. Yi-Cheng Huang and Ming-Chi Hsu, “A New Particle Swarm Optimization with Iterative Learning Control for Precision Motion Control,” International Conference on Applied System Innovation, May 22- 26, Osaka, Japan, 2015.
16. Jen-Ai Chao, Yi-Cheng Huang and Chang-Chih Liu, “Prognostic Diagnosis of the Rotor Status of the Air-Turbine Dental Handpieces Using Sound and Vibration Signals,” International Conference on Applied Science and Engineering, Oct. 31-Nov. 4, Kenting, Taiwan, 2014.
17. Yi-Cheng Huang and Yi-Wei Su, “Study on Iterative Learning Control Bandwidth Tuning Using Particle Swarm Optimization for High Precision Motion,” International Conference on Information Science, Electronics and Electrical Engineering, pp. 2033-2037, April 26-28, Sapporo City, Hokkaido, Japan, 2014. (EI)
18. Yi-Wei Su, Jen-Ai Chao and Yi-Cheng Huang “Adaptive Zero-Phase Filtering Bandwidth of Iterative Learning Control by Particle Swarm Optimization”, 2nd International Conference on Intelligent Technologies and Engineering Systems, Dec. 12-14, Kaohsiung, Taiwan, 2013.
19. Yi-Cheng Huang, Shu-Ting Li and Kan-Heng Peng, “Precision Motion of Iterative Learning Controller Using Adaptive Filter Bandwidth Tuning by Improved Particle Swarm Optimization Technique,” 2013 International Conference on Mechanical, Automotive and Materials Engineering, July 26-27, Hong Kong, 2013.
20. Yi-Chang Huang, Guan-Zhang Ding, Bo-Hsuan Chen and Yu-Ray Huang, “Simulation and Experiment of Langevin Type Piezoelectric Ultrasonic Horn for Micro Tool Motion”, International Conference on Intelligent Technologies and Engineering Systems, Dec. 13-15, Changhua, Taiwan, 2012.
21. Yi-Cheng Huang, Yu-Shi Chen, Shi-Lun Sun and Kuan-Heng Peng, “Prognostic Diagnosis of Hollow Ball Screw Pretension on Preload Loss through Sensed Vibration Signals”, International Conference on Intelligent Technologies and Engineering Systems, Dec. 13-15, Changhua, Taiwan, 2012.
22. Shu-Ting Li, Jen-Ai Chao, Yi-Hao Li and Yi-Cheng Huang, “Design the Bandwidth of Zero Phase Filter of Iterative Learning Controller by Improved Particle Swarm Optimization”, International Conference on Intelligent Technologies and Engineering Systems, Dec. 13-15, Changhua, Taiwan, 2012. [The Third Student Paper Competition Award]
23. Yi-Cheng Huang and Yan-Chen Shin, “Method of Intelligent Fault Diagnosis of Preload Loss for Single Nut Ball Screws through the Sensed Vibration Signals,” International Conference on Machine Learning and Data Analysis, World Academy of Science, Engineering and Technology, Issue 65, pp. 1394-1401, Tokyo, Japan, May 29-30, 2012. (EI)
24. Yi-Cheng Huang and Kun-Yang Li, “Numerical Simulation and Experimental Study on Bonding Tool Design of Thermosonic Transducer for Flip Chip Bonding,” International Conference on Mechatronics and Applied Mechanics, Hong Kong, Dec. 27-28, 2011. (EI)
25. Yi-Cheng Huang and Fong-You Lee “Dynamic Balancing Modal Analysis and Vibration Suppressing Design for Reciprocating Compressor,” International Conference on Mechatronics and Applied Mechanics, Hong Kong, Dec. 27-28, 2011. (EI)
26. Ying-Hao Li, Yi-Cheng Huang and Jen-Ai Chao, “Improved Particle Swarm Optimization by Updating Constraints of PID Control for Real Time Linear Motor Positioning,” the 2011 International Conference on Electric and Electronics, Vol. 4, June 20-22, 2011, Nanchang, China. (EI)
27. Yan-Chen Shin, Yi-Cheng Huang and Jen-Ai Chao, “Diagnosis of Ball Screw Preload Loss by Vibration Signals through the. Hilbert-Huang Transform and Multiscale Measure,” 2011 International Conference on Information Technology for Manufacturing Systems (ITMS 2011), Vol. 1, Shanghai, China, May 7-8, 2011. (EI)
28. Jun-Liang Chang, Jen-Ai Chao and Yi-Cheng Huang, “Ball Screw Preload Loss for Machine Tool by Acoustic Diagnosis Signals through the Hilbert-Huang Transform and Multiscale Entropy,” International Conference on Manufacturing and Systems, pp. 400-405, Dec. 16-18, Tainan, Taiwan, 2010.
29. Jun-Liang Chang, Jen-Ai Chao, Yi-Cheng Huang and Jen-Shyong Chen,“ Prognostic Experiment for Ball Screw Preload Loss of Machine Tool through the Hilbert-Huang Transform and Multiscale Entropy Method,” IEEE International Conference on Information and Automation, pp.376-380, June 20-23, Harbin, Heilongjiang, China, 2010 (EI)
30. Ming-You Ma, Jen-Ai Chao and Yi-Cheng Huang, “Improved Particle Swarm Optimization Approach of PID Controller Design for Machine Tool Positioning,” IEEE International Symposium on Computer, Communication, Control and Automation, pp.450-453, May 5-7, Tainan, Taiwan, 2010 (EI)
31. Yan-Bin Huang, Yu-Han Jian, Ming-You Ma and Yi-Cheng Huang, “Control of a Linear Synchronous Motor Using Adaptive Filter”, Proceedings of 2009 CACS International Automatic Control Conference National Taipei University of Technology, Taipei, Taiwan, Nov. 27-29, 2009.
32. Yi-Cheng Huang, Jen-Ai Chao, Chao-Huang Chen and Chun-Ying Lee “Modal Analysis and Experiment Implementation a New Flexible Hinge Positioning Stage,” 20th International Conference on Adaptive Structures and Technologies (ICAST 2009), pp.813-824, Hong Kong, October 20 – 22 2009. (EI)
33. Fu-Sheng Hsiao, Jen-Ai Chao,Yi-Cheng Huang, “3D Finite Element Analysis and Experiment on the Piezoelectric Ultrasonic Transducer Motion,” Proceeding of the 2009 IEEE International Conference on Mechatronics and Automation, pp. 158-163, Changchun, Jilin, China, August 9-12, 2009. (EI)
34. Yi-Cheng Huang, Fu-Sheng Hsiao, “FEM Analysis and Experimental Verification of the Ultrasonic Transducer for Thermosonic Flip-Chip Bonding Machine,” Proceeding of the 2009 IEEE International Conference on Information and Automation, pp. 773-778, Zhuhai/Macau, China, June 22-25, 2009. (EI)
35. Yi-Cheng Huang, Jen-Ai Chao and Hsiang-Jung Lin, “Study on a PZT Actuator Based on Pre-stressed Mechanism,” Proceeding of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 722-727, Xian, China, July 2-5, 2008. (EI)
36. Yi-Cheng Huang, Kun-Yang Li and Chi-Hui Chen, “Experiment Study on Bonding Tool of Thermosonic Transducer for Flip-Chip Bonding,” Proceeding of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 1002-1007, Xian, China, July 2-5, 2008. (EI)
37. Chien- Wei Lai, Yi-Cheng Huang and Wu-Shun Jwo, “Design of Equalization Charger for Series Connected Batteries Based on PSoC Controller Unit,” 2007 CACS International Automatic Control Conference, November 9-11, 2007, National Chung Hsing University, Taichung, Taiwan.
38. Yi-Cheng Huang and Chi-Fan Chen, “Development of an Innovative Pre-stressed PZT Actuator by FEA and Experiment Verification,” IEEE International Symposium on Industrial Electronics (ISIE), June 4-7 pp. 1452-1457, Vigo, Spain, 2007. (EI)
39. Yi-Cheng Huang, K.-Y. Li, F.-S. Hsiao and C.-H. Chen, “Fabrication Study of a LED Thermosonic Flip Chip Bonding Apparatus,” IEEE ICM2007, Kumamoto, Japan, May 8-10, 2007. (EI)
40. Yi-Cheng Huang, Jia-Ling Tsai and Fong-You Lee, “The Study of a New Structure of Fiber Bragg Grating with FFPI Filter for Force Sensing,” IEEE ICM2007, Kumamoto, Japan, May 8-10, 2007. (EI)
41. Yi-Cheng Huang, Jen-Ai Chao and Chih-Hao Cheng, Robust Tracking Control of a Piezodriven Monolithic Flexure-Hinge Stage, Second Symposium on Piezoelectricity, Acoustic Waves, and Device Application , SPAWADA06, Dec. 14-17, Zhejiang University, China, 2006. (EI)
42. Yi-Cheng Huang, Chi-Fan Chen and Chan-Wei Hsu, Design and Analysis of an Innovative PZT Actuator by FEA and Experiment Verification, The 17th International Conference on Adaptive Structures and Technologies, ICAST2006, Oct. 16-19, 2006. (EI)
43. Hung-Lin Hsieh, Cheng-Wei Chein, Yi-Cheng Huang and Jyh-Chen Chen, “The Overlapping Effects of Step Exposure by Laser Interferometric Lithography” System. SPIE Optics & Photonics, San Diego, CA, USA, August 13 – 17, 2006. (EI)
44. Yi-Cheng Huang, Yu-Lun Tseng, Hung-Yi Chen, “Research on the Loading of the Hard and Soft Tissues Based on Water Hydraulic System with Fiber Bragg Grating Sensing,” the 1st IEEE Conference on Industrial Electronics and Applications (ICIEA 2006), pp. 1157-1162, Singapore, May 24-26, 2006. (EI)
45. Yi-Cheng Huang and Mou-Sheng Lin, “Tracking Control of a Piezo-actuated Stage Based on Frictional Model, ”, Proceeding of the 12th SPIE Symposium on Smart Structures and Materials: Modeling, Signal Processing, and Control, Vol. 5757, pp. 481-490 March 6-10, San Diego, CA, USA, 2005. (EI)
46. Yi-Cheng Huang and Chi-Fan Chen, “Prototype Research of the Electric-Magnetic Powered Gene Gun by Using FEA,” pp. 102-107, The 8th International Conference on Automation, National Chung-Hsing University, Taichuang, Taiwan, R.O.C. May 5-6, 2005.
47. Yi-Cheng Huang, K. C. Chung, M-S. Lin, and H. M. Chen, Proceedings of the 2005 IEEE International Conference on Mechatronics (ICM) and Hands-on Intelligent Mechatronics and Automation (HIMA), “Inspecting LED Micro Structure by Linear Piezo Servo System,” pp. 151-156, July 10-12, 2005, Taipei, Taiwan. (EI)
48. Yi-Cheng Huang and Chih-Hao Cheng, “Robust Tracking Control of a Novel Piezodriven Monolithic Flexure-Hinge Stage,” Proceeding of the 2004 IEEE International Conference on Control Application, Taipei, Taiwan, pp. 977-982, September 2-4, 2004. (EI)
49. Yi-Cheng Huang and Mou-Sheng Lin, Che-Ming Liu and Jyh-Chen Chen, “Design and Analysis of the Piezo Driven Motion Stage with Scanning-by-Probe AFM,” Proceeding of International Conference on Intelligent Mechatronics and Automation (IEEE/ ICIMA), Chengdu, China, pp. 793-798, August 26-31, 2004. (EI)
50. Che-Ming Liu, Jyh-Chen Chen, Yi-Cheng Huang, Hung-Lin Hsieh, Mou-Sheng Lin, “Growth of Mg-Al Spinel Nanocrystals on Sapphire Surface Using a Precipitation Process, ” The 11th Symposium on Nano Device Technology, Hsin-Chu, Taiwan, pp. 418-421, May 11-13, 2004.
51. Yi-Cheng Huang and Mou-Sheng Lin, “Fabrication and Design of a Precision Piezo-driven X-Y stage System for Atomic Force Microscopy,” International Symposium on Nano Science and Technology, Subject F: Nano Measurement and Systems, F-P-01, p. 222, Tainan, Taiwan, Nov. 4-7, 2003.
52. Yi-Cheng Huang, Manuel Chan, Yi-Ping Hsin and Ching-Chang Ko, “Use of Iterative Learning Control on Improving Intra-Oral Hydraulic Loading System of Dental Implants,” 2003 IEEE International Symposium on Intelligent Control, pp. 63-68, Houston, TX, USA, October 5-8, 2003. (EI)
53. Yi-Cheng Huang and Chih-Hao Cheng, “Internal Model Control Approach for Designing Piezoelectric Actuator Controller with Nonminimum Phase,” 2003 IEEE International Symposium on Intelligent Control, pp. 188-193, Houston, TX, USA, October 5-8, 2003. (EI)
54. Yi-Cheng Huang and Ching-Hue Tsao, “Automated Input Shape Current Control of Lead-Acid Battery Rapid Charger”, The 7th International Conference on Automation Technology, National Chung Cheng University, Chia-yi, Taiwan, R.O.C., pp. 673-678, September 12-14, 2003.
55. Yi-Cheng Huang and De-Yao Lin, “Tracking Control of a Piezoelectric Actuator Based on Experiment Hysteretic Modeling,” Proceeding of the 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 308-313, Kobe, Japan, July 21-25, 2003. (EI)
56. Yi-Cheng Huang and De-Yao Lin, “Comparison Experiments by Use of Computational Enhancement Control on Piezoelectric Actuator, ” Proceedings of the International Symposium on Experimental Mechanics (ISEM)-The First Asian Conference on Experimental Mechanics, Dynamic Testing and Measurement (I), Taipei, December 28-30, 2002.
57. Yi-Cheng Huang, Wen-Yung Liang and Ming-Hsin Huang, “High Speed Piezoelectric Micro Actuation Using Feedback Control Battery Charger Design,” Proceedings of the 3rd Asian Control Conference, Shanghai, July 4-7, pp. 2423-2428, 2000.
58. Yi-Cheng Huang, Wen-Yung Liang, Chao-Cheng Lu and Chih-Wen Hsieh, “Application of a Novel Battery Charger System to New Developed Piezoelectric Actuator for High Speed Micropositioning Motion,” 2000 IEEE International Symposium on Circuits and Systems, Geneva, Switzerland, May 28-31, pp. II-501-II504, 2000. (EI)
59. Yi-Cheng Huang, Ming-Hsin Huang, Pao-Yuan Chen and Chao-Cheng Lu, “Fast Charging of Lead-Acid Battery: Use of AC Conductive Angle Waveform Input Pulse,” Proceedings of The 5rth Annual International Conference on Industrial Engineering -Theory, Applications and Practice, December 13-15, 2000, Hsinchu, Taiwan.
60. Yi-Cheng Huang and Pao-Yuan Chen, “Technique of Industry Wide Automation by Use of PC-Based Protocol Security Design, “ Proceedings of the 6th International Conference on Automation Technology, Taipei, Automation, May, Vol. 1, pp. 286-3-286, 2000.
61. Yi-Cheng Huang, Chang-Yuan Lee and Pao-Yuan Chen, “Real Time Implementation of Embedded Repetitive Controller Design Applied with Industrial Servo Interface,” Proceedings of the First Asian Symposium on Industrial Automation and Robotics, pp. 171-175, Bangkok, Thailand, May 6-7,1999.
62. Yi-Cheng Huang and Richard W. Longman, “The Source of the Often Observed Property of Initial Convergence Followed by Divergence in Learning and Repetitive Control,” Advances in the Astronautical Science, Vol. 90, pp. 555-572. Proceeding of the 1995 AAS/AIAA Astrodynamics Conference, August, Halifax, Nova Scotia, Canada.
63. Richard W. Longman and Yi-Cheng Huang, “Analysis and Frequency Response of the Alternating Sign Learning and Repetitive Control Laws,” Advances in the Astronautical Science, Vol. 90, pp.1105-1124. Proceeding of the 1995 AAS/AIAA Astrodynamics Conference, August, Halifax, Nova Scotia, Canada.
64. Richard W. Longman and Yi-Cheng Huang, ”Use of Unstable Repetitive Control for Improved Tracking Accuracy”, ASME Winter Annual Meeting, The International Mechanical Engineering Congress and Exposition, Chicago, Illinois, Adaptive Structures and Composite Materials: Analysis and Application, AD-Vol.45/MD-Vol. 54, pp. 315-324, November 1994. (EI)